Canon R5 owners are concerned about the overheating problem on their cameras.
The Canon EOS R5 mirrorless camera has one of the best features to further your photography journey.
It’s a 45MP full frame CMOS sensor, Digic X image processor, and other features.
However, this camera has its own issues and problems, notably overheating due to the cooling system. So this article will discuss ways to prevent Canon R5 overheating and what you can do to fix it.
Camera hack to prevent overheating
Apparently, there are a few ways to hack the Canon R5 camera so it will not overheat. For starters, you need to know that the camera will no longer overheat if the power is turned off.
In fact, when you turn the camera off, the timer won’t write to the main memory.
In other words, the camera won’t overheat because it doesn’t have to.
Another way to hack a camera is to change the firmware. There is an update for Canon’s firmware available. You can download this firmware from Canon’s website.
You can also download the software from their website. It is safe to download.
Just make sure to download the latest version. However, you may encounter problems after you install the update. Make sure to back up all your data before installing this new firmware.
You may want to consider taking a look at the instructions and make sure they are working correctly before installing any updates.
Pull the battery
A good way to bypass the overheating limit in the Canon R5 is to pull the battery while the camera is recording.
The trick prevents the camera from writing thermal information to the hard drive and makes it possible to continue recording.
This method also works if the camera is still recording. But keep in mind that it won’t affect the quality of the footage. So, if you’re interested in hacking the camera, you should take a look at the tutorial.
In addition to these, the camera is also protected from overheating through the use of certain video recording limitations.
This limits the video recording time and can even damage the camera itself and memory cards. The best way to circumvent these limitations is to buy a camera that is not limited to only still pictures but also video. If you’re a true enthusiast, consider a Canon R5 camera.
You’ll be glad you did!
Fortunately, you can still save your settings before dropping the battery. Fortunately, the camera has a feature where you can save the recording parameters before you drop the battery.
This hack requires you to download the latest firmware from the Canon website.
Afterward, you can change the date and press OK to return to the previous setting. It’s not a complicated process, but you’ll need to explain the method to Canon’s board.
The problem is that the R5 camera has a thermal management system that doesn’t work right. The time spent on the camera is also a factor that causes it to overheat. However, there’s a simple and inexpensive way to combat this problem. You can even use scotch tape to fix the problem.
However, this solution is not advisable for beginners. Regardless of whether you’re a professional or just a novice, make sure to check out the instructions on the website of J. Marcus Photography for more information.
Water-cooling system hack to prevent overheating
A recent YouTube video has demonstrated how a water-cooling system can prevent a Canon r5 from overheating.
The video features a DIY water cooling solution, and Canon’s firmware v1.0.0 is still showing an overheating warning after 20 minutes. It is unclear why this problem occurs, but Canon has since updated the firmware to v1.1.11, which fixes the problem.
Fortunately, this problem was already known. Canon R5’s heat problem was a known issue the entire time. A vapor chamber embedded in the body wall would have allowed the camera to cool sufficiently to perform permanent work in a variety of temperatures.
In fact, a laptop with 150W of power is perfectly fine, and even a 3W camera body should have been able to run this.
But a hole in the booting sequence and a “drop power” hack fixed the problem.
However, despite its new overheating limits, the Canon R5 has some way of bypassing them. The trick, described by YouTuber Horshack, is to pull the battery while the camera is recording.
Since the camera is still recording, pulling the battery does not change the footage, and therefore does not write thermal information. In this way, the camera won’t write any thermal information to the memory.
The original design for the EOS R5 was based on its high-quality image quality. A new design by Kolari Vision uses a custom heatsink that vents thermal energy from the processor to the magnesium frame, effectively turning the camera’s entire frame into a heatsink.
But while this method has been used by many, its high-end quality limits the shooting time and cannibalize Canon’s cinema cameras.
The new version of the camera has an additional advantage: it will no longer run an overheat timer when the camera is off. That means you can save your settings before dropping the battery.
After pressing the OK button, you can switch the date. Once done, the camera will restart without any problem.
To get the camera to keep its current settings, you must first explain the new hack to the Canon board.
The R5 is a very popular camera, and the camera is also capable of great quality video. It is advertised as the ultimate hybrid DSLR. It promised high pixel count for photography, and great video quality.
However, the R5 is not as cool as other cameras. There is a hack that alters the camera’s cooling system, but it is a relatively simple procedure.
Fan hack to prevent overheating
A fan hack for the Canon R5 isn’t necessary, but it would help to keep the camera cooler when it overheats.
The hack involves writing to the EPROM when the camera overheats, and periodically reading the time counter.
The hack is based on a technique used by J. Marcus Photography, Reid at EOSHD, and Matt Granger, and they’ve verified it works.
First, you need to understand that a thermal pad is not necessary in a Canon R5.
The manufacturer states that the magnesium alloy housing effectively dissipates heat, but this is a myth based on the lack of optimal conductivity.
The best way to fix the problem is to download a firmware update for the camera, which improves the camera’s record times from a cold start or reset depending on ambient air temperature.
Another way to avoid the camera overheating problem is by using a fan. This is a great solution to the overheating problem, but it does void the camera’s warranty.
It’s worth remembering that this hack is only for amateurs, and you will be voiding the camera’s warranty by doing so. If you’re a professional videographer, however, don’t be hesitant to apply it. After all, your time is money, and a camera that’s constantly overheating is not a time-saver.
There’s another method to defeat the overheating limit of the Canon R5. It involves removing the battery while recording, which means the camera’s battery could corrupt the footage.
Using a fan hack for the Canon R5 might be the solution for you. The fan hack will prevent your camera from overheating by preventing the thermal data from being written to the NVRAM. This method will only affect the camera’s thermal data but will not affect your footage.
The fan hack to prevent Canon R5 overheating works by replacing the R5’s copper heatsink. This allows the R5 to record unlimited 8K video in ambient room temperature of 73F/23C.
This hack may increase the R5’s record time by a considerable amount, but is a bit heavier. This method is not recommended for everyone, as it may cause damage to the camera’s hardware.
Canon E5 Overheating: Conclusion
In addition to installing a fan hack, a Chinese camera accessory company also offers a cooling fan kit.
It’s worth noting that Tilta, which makes the camera overheat-resistant, has yet to be released.
The fan hack for Canon R5 overheating, however, works well with both firmware versions. However, one caveat exists.
The camera should be cooled down at room temperature for the best results.